Supply and Installation of Concrete Screed

Concepts

• floor screed works
• hull
• installation of concrete screed flooring
• total thickness of the screed
• thickness of the screed
• screed
• installation of concrete screed
• minimum 25mm of cover
• final floor finish
• top of an underfloor heating system

Location

Description

This invitation to quote is for the supply and installation of concrete screed flooring to cover an area of approx 442.5m2, suitable for the intended finish in accordance with the relevant British Standards (including BS 8204 and BS 8203) and manufacturer's recommendations. The screed is to be applied on top of an underfloor heating system (see appendix section). There should be a minimum 25mm of cover over the highest point of pipes and insulation. The underfloor heating pipes are specified as 16mm Pert S5 Polythene pipes with a 2.0mm wall thickness at 150mm centres. 40mm tackerclips will secure the underfloor heating pipes to the insulation sub-base. The total thickness of the screed required is therefore estimated to be 50 - 75mm to ensure coverage of the underfloor heating pipes. Your quote should specify the thickness of the screed you would recommend to ensure optimum performance and durability. The screed should be installed with the relevant expansion joints as required, consistent with the size of the slab, and between any independently controlled heating zones. The final floor finish will be a resin applied to the screed (Epoxy, MMA or similar), and so the screed specified should be suitable for a resin top layer.

CPV Codes

• 45262321 - Floor-screed works

Indicators

• Contract is suitable for SMEs.
• Contract is suitable for VCOs.

Other Information

Please read the attached document for further information and provide a written quote to Martin Newman at CLLD@giroscope.org.uk Building Materials ITQ Screed.pdf