Technology Development Centre

• Value: £3M

Refurbishment of the building currently known as Shed D, this will include the provision of lab and furnished office space within the building The Contractor is required to meet and deliver the following requirements: 1. Design and refurbishment of the building known as Shed D, including lab & office space, as well as providing foundations for a 1MW test rig facility 2. Interior design and fit out of building to provide at least 650m2 of office space, including furniture.

• Value: £700K

1. Supply and install a ring main switch within the BT2 11kV switch room 2. Supply and installation of underground cabling 3. Construction of an external transformer compound 4. Construct a HV switch room within the building to accommodate all of the electrical switch gear 5. Supply and install within the above compound 2 (two) 1MVA 11kV to 415V transformers and 1 (one) 0.5MVA transformer and cabling to the HV switch gear. 6. Provide earthing. 7. Provide lightning protection 8. Provide a LV distribution panel and supply cable, auxiliary supply cable, VSD supply cable and motor supply cable 9. Provide a LV distribution panel and cabling for the wind tunnel 10 A building services distribution board and cable as well as cabling for the building services,

• Value: £350K

ORE Catapult has a requirement to construct permanent weather proofing to a 6MW bearing test rig at its site in Blyth, Northumberland, which would require a footprint of approximately 8m by 8m to a height in the region of 10m; . Design and installation of a weather proofing solution to protect the central ‘hub’ region of the test rig to replace the short-term temporary solution that is currently in place. ORE Catapult is seeking prices for both single & double skin buildings